EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Steel numbers   ->   Number 1.43XX           OR           Steel and cast iron standards   ->     /   EN 10088-2   /   EN 10088-3   /   EN 10028-7   /   EN 10222-5   /   EN 10216-5   /   EN 10217-7   /   EN 10296-2   /   EN 10253-3   /   EN 10253-4   /   EN 10272   /   EN 10250-4   /   EN 10297-2   /   EN 10088-1   /   EN 10088-5   /   EN 10088-4

X2CrNiN18-10   ( 1.4311 )

    Grade :     X2CrNiN18-10
    Number:     1.4311
    Standard:
    EN 10088 - 2 : 2005   Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
    EN 10088 - 3 : 2005   Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    EN 10028 - 7 : 2007   Flat products made of steels for pressure purposes. Stainless steels
    EN 10222 - 5 : 2000   Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
    EN 10216 - 5 : 2004   Seamless steel tubes for pressure purposes. Stainless steel tubes
    EN 10217 - 7 : 2005   Welded steel tubes for pressure purposes. Stainless steel tubes
    EN 10296 - 2 : 2005   Welded circular steel tubes for mechanical and general engineering purposes. Stainless steel
    EN 10253 - 3 : 2008   Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
    EN 10253 - 4 : 2008   Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
    EN 10272 : 2007   Stainless steel bars for pressure purposes
    EN 10250 - 4 : 2000   Open steel die forgings for general engineering purposes. Stainless steels
    EN 10297 - 2 : 2005   Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel
    EN 10088 - 1 : 2005   Stainless steels. List of stainless steels.
    EN 10088 - 5 : 2009   Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
    EN 10088 - 4 : 2009   Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    Density:     7.9   g/cm ³
    Classification:     Austenitic stainless steel
    Equivalent grades:     Go here



Chemical composition %   of grade   X2CrNiN18-10 (1.4311)
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn Ni P S Cr N
max   0.03max   1max   28.5 - 11.5max   0.045max   0.01517.5 - 19.50.12 - 0.22


Mechanical properties of grade   X2CrNiN18-10 (1.4311)

Rm - Tensile strength (MPa) (+A)550-760
Rm - Tensile strength (MPa) (+AT)550-760


Rp0.2 0.2% proof strength (MPa) (+AT)270
Rp0.2 0.2% proof strength (MPa) (+A)270-305


KV - Impact energy (J) transverse, (+A)+20°
60
-196°
60
KV - Impact energy (J) longitud., (+A)+20°
100


A - Min. elongation at fracture (%) (+A)30-40
A - Min. elongation at fracture (%) longitud., (+AT)35-45


  Brinell hardness   (HB):   (+A)230
  Brinell hardness   (HB):   (+AT)210


Properties of grade   X2CrNiN18-10 (1.4311)
Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Steel shal not be applied at a metal temperature lower than -270 ° C


Equivalent grades of grade   X2CrNiN18-10 (1.4311)
Warning! Only for reference
USA
-
Japan
JIS
France
AFNOR
England
BS
Sweden
SS
304LN
SUS304LN
Z3CN18-10Az
304S61
2371


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc


Heat treatment conditions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Austenitic stainless steel   X2CrNiN18-10 (1.4311), Chemical composition of   X2CrNiN18-10 (1.4311). Equivalent grades of   X2CrNiN18-10 (1.4311). Standards of   X2CrNiN18-10 (1.4311).
Properties of   X2CrNiN18-10 (1.4311). Hardness of   X2CrNiN18-10 (1.4311). Strength of   X2CrNiN18-10 (1.4311). Elongation of   X2CrNiN18-10 (1.4311).

©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user