EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us

YOU HERE:   Steel numbers   ->   Number 1.00XX           OR           Steel and cast iron standards   ->     /   EN 10250-2

S235JRG2   ( 1.0038 )

    Grade :     S235JRG2
    Number:     1.0038
    Classification:     ??? According EN 10025-2 steel number 1.0038 named S235JR ???
    Standard:
    EN 10250-2: 2000 Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
    Equivalent grades:     Go here



Chemical composition %   of grade   S235JRG2 (1.0038):   EN 10250-2-2000
For forgings with an equivalent diameter or thickness > 100 mm the carbon content shall be agreed beetween purchaser and supplier.
C Si Mn Ni P S Cr MoAl -
max   0.2max   0.55max   1.4max   0.3max   0.045max   0.045max   0.3max   0.08min   0.02 Cr+Mo+Ni < 0.48


Mechanical properties of grade   S235JRG2 (1.0038)

Nominal thickness (mm):   to 100100 - 250250 - 500
Rm - Tensile strength (MPa) (+N)340340340


Nominal thickness(mm):   to 100100 - 250250 - 500
Re - Upper yield strength (MPa) (+N)215175165


Nominal thickness (mm):     to 100100 - 250250 - 500
A - Min. elongation at fracture (%) longitud., (+N)242323
A - Min. elongation at fracture (%) transverse, (+N)17


Equivalent grades of grade   S235JRG2 (1.0038)
Warning! Only for reference
USA
-
Germany
DIN,WNr
Japan
JIS
France
AFNOR
England
BS
European old
EN
Italy
UNI
Spain
UNE
China
GB
Sweden
SS
Poland
PN
Czechia
CSN
Finland
SFS
Austria
ONORM
Russia
GOST
Inter
ISO
Gr.36
RSt37-2
S235JRG2
SS330
E24-2NE
40B
Fe360BFN
S235JRG2
AE235B-FN
Q235C
1312-00
St3S
11375
Fe37B
RSt360B
St3ps
St3sp
Fe360B



Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc


Heat treatment conditions

+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

??? According EN 10025-2 steel number 1.0038 named S235JR ???   S235JRG2 (1.0038)
Chemical composition of   S235JRG2 (1.0038). Equivalent grades of   S235JRG2 (1.0038). Standards of   S235JRG2 (1.0038).
Properties of   S235JRG2 (1.0038). Hardness of   S235JRG2 (1.0038). Strength of   S235JRG2 (1.0038). Elongation of   S235JRG2 (1.0038).

EUROPEAN STEEL AND ALLOY GRADES
©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user