Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Steel numbers   ->   Number 1.40XX           OR           Steel and cast iron standards   ->     /   EN 10088-2   /   EN 10088-3   /   EN 10088-1

X46Cr13   ( 1.4034 )

Grade : X46Cr13
Number: 1.4034
    EN 10088 - 2 : 2005   Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
    EN 10088 - 3 : 2005   Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    EN 10088 - 1 : 2005   Stainless steels. List of stainless steels.
Density: 7.7   g/cm ³
Classification: Martensitic stainless steel
Equivalent grades: Go here

Free Trip Photo Album
1000 tourist attractions in the world
Make Trip Album with 1000 sights!
USA   Germany   Great Britain   Italy

Chemical composition %   of grade   X46Cr13 (1.4034)
Tighter carbon ranges may be agreed at the time of enquery and order
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn P S Cr
0.43 - 0.5max   1max   1max   0.04max   0.01512.5 - 14.5

Mechanical properties of grade   X46Cr13 (1.4034)

Rm - Tensile strength (MPa) (+A)780
Rm - Tensile strength (MPa) (+QT800)850-1000

Rp0.2 0.2% proof strength (MPa) +QT800650

KV - Impact energy (J) longitud., +20°

A - Min. elongation at fracture (%) 10-12

  Brinell hardness   (HB):   (+A)245

Equivalent grades of grade   X46Cr13 (1.4034)
Warning! Only for reference
Free Trip Photo Collage

with 1000 tourist attractions!

Great Britain

Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite delasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Heat treatment conditions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Chemical composition of   X46Cr13 (1.4034). Equivalent grades of   X46Cr13 (1.4034). Standards of   X46Cr13 (1.4034).
Properties of   X46Cr13 (1.4034). Hardness of   X46Cr13 (1.4034). Strength of   X46Cr13 (1.4034). Elongation of   X46Cr13 (1.4034).

©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user