SteelNumber: European Steel and Alloy Grades / Numbers Database
          Home Steel Numbers Steel and Cast Iron Standards Alloy Standards Search Buy / Sell Product Worldwide Equivalents About Us          
YOU HERE:   Steel Numbers   ->   Number 1.41XX           OR           Steel & Cast Iron Standards   ->     /   EN 10088-2   /   EN 10088-3   /   EN 10263-5   /   EN 10088-1

X6CrMo17-1   ( 1.4113 )


    Grade :     X6CrMo17-1
    Number:     1.4113
    Classification:     Ferritic stainless steel
    Density:     7.7   g/cm ³
    Standard:
    EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
    EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    EN 10263-5: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels
    EN 10088-1: 2005 Stainless steels. List of stainless steels
    Equivalent grades:     No information



Chemical composition %   of   steel   X6CrMo17-1 (1.4113):   EN 10088-2-2005
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
C Si Mn P S Cr Mo
max   0.08max   1max   1max   0.04max   0.01516 - 180.9 - 1.4


Mechanical properties of   steel   X6CrMo17-1 (1.4113)

Rm - Tensile strength (MPa) (+A)440-660


Rp0.2 0.2% proof strength (MPa) (+A)280


A - Min. elongation at fracture (%) (+A)18


Nominal diameter (mm):     2 - 25
Z - Reduction in cross section on fracture (%)57-60


  Brinell hardness   (HB):   (+A)200


Properties of   steel   X6CrMo17-1 (1.4113)
Resistance to intergranular corrosion: in the delivery condition - yes; in the welded condition - no

NEW opportunities for buyers!
Post free buying requirement   of   steel   X6CrMo17-1 (1.4113)



Mechanical properties
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc


Heat treatment conditions

+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Ferritic stainless steel
Chemical composition of   steel   X6CrMo17-1 (1.4113), Standards of   steel   X6CrMo17-1 (1.4113)
Mechanical Properties of   steel   X6CrMo17-1 (1.4113)
Tensile Strength, Elongation, Proof strength, Hardness


European Steel and Alloy Grades / Numbers Searchable Database   ©   2011- 2017   All rights reserved.     About us. Contacts.
The contents from this Steel & Alloy Database may not be reproduced.   The entire risk as to use of these content is assumed by you the user
Google+   SteelNumber