EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Steel numbers   ->   Number 1.49XX           OR           Steel and cast iron standards   ->     /   EN 10302   /   EN 10269   /   EN 10088-1

X22CrMoV12-1   ( 1.4923 )

    Grade :     X22CrMoV12-1
    Number:     1.4923
    Standard:
    EN 10302 : 2008   Creep resisting steels, nickel and cobalt alloys
    EN 10269 : 1999   Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    EN 10088 - 1 : 2005   Stainless steels. List of stainless steels.
    Density:     7.7   g/cm ³
    Classification:     Alloy special martensitic creep-resisting steel
    Equivalent grades:     Go here


Chemical composition %   of grade   X22CrMoV12-1 (1.4923)
C Si Mn Ni P S Cr Mo V
0.18 - 0.24max   0.50.4 - 0.90.3 - 0.8max   0.025max   0.01511 - 12.50.8 - 1.20.25 - 0.35


Mechanical properties of grade   X22CrMoV12-1 (1.4923)

Rm - Tensile strength (MPa) (+QT)800-950


Rp0.2 0.2% proof strength (MPa) (+QT)600


KV - Impact energy (J) (+QT)+20°
27


A - Min. elongation at fracture (%) (+QT)14


Z - Reduction in cross section on fracture (%) (+QT)40


  Brinell hardness   (HBW):   (+A)302


Equivalent grades of grade   X22CrMoV12-1 (1.4923)
Warning! Only for reference
France
AFNOR
Z21CDV12


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc


Heat treatment conditions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Chemical composition of   X22CrMoV12-1 (1.4923). Equivalent grades of   X22CrMoV12-1 (1.4923). Standards of   X22CrMoV12-1 (1.4923).
Properties of   X22CrMoV12-1 (1.4923). Hardness of   X22CrMoV12-1 (1.4923). Strength of   X22CrMoV12-1 (1.4923). Elongation of   X22CrMoV12-1 (1.4923).

©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user