EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Steel numbers   ->   Number 1.65XX           OR           Steel and cast iron standards   ->     /   EN 10277-5   /   EN 10083-3   /   EN 10269   /   EN 10263-4   /   EN 10250-3

34CrNiMo6   ( 1.6582 )

    Grade :     34CrNiMo6
    Number:     1.6582
    Standard:
    EN 10277 - 5 : 2008   Bright steel products. Technical delivery conditions. Steels for quenching and tempering
    EN 10083 - 3 : 2006   Steels for quenching and tempering. Technical delivery conditions for alloy steels
    EN 10269 : 1999   Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    EN 10263 - 4 : 2001   Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering
    EN 10250 - 3 : 2000   Open steel die forgings for general engineering purposes. Alloy special steels
    Classification:     Alloy special steel
    Equivalent grades:     Go here



Chemical composition %   of grade   34CrNiMo6 (1.6582)
C Si Mn Ni P S Cr Mo
0.3 - 0.38max   0.40.5 - 0.81.3 - 1.7max   0.025max   0.0351.3 - 1.70.15 - 0.3


Mechanical properties of grade   34CrNiMo6 (1.6582)

Nominal diameter (mm):   to 1616 - 4040 - 100100 - 160160 - 250
Rm - Tensile strength (MPa) (+QT)1200-14001100-13001000-1200900-1100800-950
Rm - Tensile strength (MPa) (+AC)720


Nominal diameter(mm):   or for flat products thickness: to 8; 8-20; 20-60; 60-100; 100-160; to 1616 - 4040 - 100100 - 160160 - 250
Re - Upper yield strength or
Rp0.2 - 0.2% proof strength (MPa) (+QT)
1000900800700600
Nominal thickness(mm):   to 160160 - 330330 - 660
Re - Upper yield strength (MPa) (+QT)600540490


KV - Impact energy (J) longitud., (+QT)+20°
45
-40°
40


A - Min. elongation at fracture (%) transverse, (+QT)9-14


Nominal thickness (mm):     to 1616 - 4040 - 100100 - 160160 - 250
A - Min. elongation Lo = 5,65 √ So (%) (+QT), round products 910111213


Nominal diameter (mm):     or for flat products thickness: to 8; 8-20; 20-60; 60-100; 100-160; to 1616 - 4040 - 100100 - 160160 - 250
Z - Reduction in cross section on fracture (%) (+QT)4045505555
Z - Reduction in cross section on fracture (%) (+AC)58


  Brinell hardness   (HBW):   (+A)248 - 255


Equivalent grades of grade   34CrNiMo6 (1.6582)
Warning! Only for reference
USA
-
Germany
DIN,WNr
Japan
JIS
France
AFNOR
England
BS
Italy
UNI
China
GB
Sweden
SS
Poland
PN
Czechia
CSN
Russia
GOST
Inter
ISO
4340
34CrNiMo6
GS-34CrNiMo6V
SNCM447
35NCD6
817M40
35CrNiMo6
35NiCrMo6KB
34CrNi3Mo
34CrNiMo
ZG34CrNiMo
2541
34HNM
16342
16343
16444
36KH2N2MFA
38KH2N2MA
40KHN2MA
36CrNiMo6


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc


Heat treatment conditions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Alloy special steel   34CrNiMo6 (1.6582), Chemical composition of   34CrNiMo6 (1.6582). Equivalent grades of   34CrNiMo6 (1.6582). Standards of   34CrNiMo6 (1.6582).
Properties of   34CrNiMo6 (1.6582). Hardness of   34CrNiMo6 (1.6582). Strength of   34CrNiMo6 (1.6582). Elongation of   34CrNiMo6 (1.6582).

©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user