EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Steel numbers   ->   Number 1.07XX           OR           Steel and cast iron standards   ->     /   EN 10277-3   /   EN 10087

11SMn30   ( 1.0715 )

Grade : 11SMn30
Number: 1.0715
Standard:
    EN 10277 - 3 : 2008   Bright steel products. Technical delivery conditions. Free-cutting steels
    EN 10087 : 1999   Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
Classification: Non-alloy quality steel not intended for heat treatment
Equivalent grades: Go here

            FREE
Trip Photo Album maker
Do You like to travel?
Make Trip Album with 1000 sights!
TripWitness.com


Chemical composition %   of grade   11SMn30 (1.0715)
If, by metallurgical techniques, the formation of special oxides is guaranteed, a Si content of 0.10 to 0.40 % can be agreed
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of the finishing the heat. However, elements such as Te, Bi etc., may be added by the manufacturer for improving the the machinability, if this has agreed at the time of enquiry and order.
C Si Mn P S
max   0.14max   0.050.9 - 1.3max   0.110.27 - 0.33


Mechanical properties of grade   11SMn30 (1.0715)

Nominal thickness (mm):   5 - 1010 - 1616 - 4040 - 6363 - 100
Rm - Tensile strength (MPa) (+C)510-810490-760460-710400-650360-630


Nominal thickness(mm):   5 - 1010 - 1616 - 4040 - 6363 - 100
Rp0.2 0.2% proof strength (MPa) (+C)440410375305245


Nominal thickness (mm):     5 - 1010 - 1616 - 4040 - 100
A - Min. elongation at fracture (%) (+C)6789


  Brinell hardness   (HBW):   (+SH)107 - 169


Properties of grade   11SMn30 (1.0715)
Weldability: Due to the high sulphur and phophorus content free-cutting steels not destined to heat treatment are not generally recommended for welding.
Machinability: This steel grade is marked by a good machinability on machine tools and by an easy fragmentation of chips.


Equivalent grades of grade   11SMn30 (1.0715)
Warning! Only for reference
Germany
DIN,WNr
France
AFNOR
Italy
UNI
9SMn28
S250
CF9SMn28
FREE

Trip Photo Collage maker

with 1000 tourist attractions!



TripWitness.com




Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite delasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc


Heat treatment conditions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated

Chemical composition of   11SMn30 (1.0715). Equivalent grades of   11SMn30 (1.0715). Standards of   11SMn30 (1.0715).
Properties of   11SMn30 (1.0715). Hardness of   11SMn30 (1.0715). Strength of   11SMn30 (1.0715). Elongation of   11SMn30 (1.0715).

©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user