EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Alloy standards   ->   Steel - all grades         OR         Alloy standards   ->     /   EN 10250-2

  S235JRG2   ( 1.0038 )

    Grade :     S235JRG2
    Number:     1.0038
    Standard: EN 10250 - 2 : 2000   Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
    Classification:     ??? According EN 10025-2 steel number 1.0038 named S235JR ???
    Equivalent grades:     Go here



Chemical composition %   of grade   S235JRG2   ( 1.0038 )
For forgings with an equivalent diameter or thickness > 100 mm the carbon content shall be agreed beetween purchaser and supplier.
C Si Mn Ni P S Cr MoAl -
max   0.2max   0.55max   1.4max   0.3max   0.045max   0.045max   0.3max   0.08min   0.02 Cr+Mo+Ni < 0.48


Mechanical properties of grade   S235JRG2   ( 1.0038 )

Nominal thickness (mm):   to 100100 - 250250 - 500
Rm - Tensile strength (MPa) (+N)340340340


Nominal thickness(mm):   to 100100 - 250250 - 500
Re - Upper yield strength (MPa) (+N)215175165


Nominal thickness (mm):     to 100100 - 250250 - 500
A - Min. elongation at fracture (%) longitud., (+N)242323
A - Min. elongation at fracture (%) transverse, (+N)17


Equivalent grades of grade   S235JRG2   ( 1.0038 )
These comparison tables are only intended as an indication of the closest khown equivalent grades.
USA
-
Germany
DIN,WNr
Japan
JIS
France
AFNOR
England
BS
European old
EN
Italy
UNI
Spain
UNE
China
GB
Sweden
SS
Poland
PN
Czechia
CSN
Finland
SFS
Austria
ONORM
Russia
GOST
Inter
ISO
Gr.36
RSt37-2
S235JRG2
SS330
E24-2NE
40B
Fe360BFN
S235JRG2
AE235B-FN
Q235C
1312-00
St3S
11375
Fe37B
RSt360B
St3ps
St3sp
Fe360B


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

??? According EN 10025-2 steel number 1.0038 named S235JR ???   S235JRG2   ( 1.0038 ). Chemical composition of   S235JRG2   ( 1.0038 ). Equivalent grades of   S235JRG2   ( 1.0038 ).
Standards of   S235JRG2   ( 1.0038 ). Properties of   S235JRG2   ( 1.0038 ). Hardness of   S235JRG2   ( 1.0038 ).

©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user