EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us

YOU HERE:   Alloy standards   ->   Aluminium - all grades         OR         Alloy standards   ->     /   EN 573-3   /   EN 755-2   /   EN 485-2   /   EN 754-2   /   EN 1301-2   /   EN 570   /   EN 941   /   EN 1386   /   EN 12392   /   EN 1715-3

  ENAW-AlMg1SiCu   ( ENAW-6061 )

    Grade :     ENAW-AlMg1SiCu
    Number:     ENAW-6061
    Classification:     Aluminium - 6000 series ( Magnesium Mg and Silicon Si are major alloying elements )
    Standard: EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 755-2: 2008 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
EN 485-2: 2008 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 754-2: 2008 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
EN 1301-2: 1997 Aluminium and aluminium alloys. Drawn wire. Mechanical properties
EN 570: 2007 Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
EN 941: 1996 Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications
EN 1386: 2007 Aluminium and aluminium alloys. Tread plate. Specifications
EN 12392: 2000 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment
EN 1715-3: 2008 Aluminium and aluminium alloys. Drawing stock. Specific requirements for mechanical uses (excluding welding)
    Equivalent grades:     Go here



Chemical composition %   of grade   ENAW-AlMg1SiCu   ( ENAW-6061 )
Fe Si Mn Cr Ti Cu Mg Zn Others -
max   0.70.4 - 0.8max   0.150.04 - 0.35max   0.150.15 - 0.40.8 - 1.2max   0.25each 0.05; total 0.15 Al - remainder


Mechanical properties of grade   ENAW-AlMg1SiCu   ( ENAW-6061 )

Rm - Tensile strength (MPa) (O) (H111)150
Rm - Tensile strength (MPa) (T4)180-205
Rm - Tensile strength (MPa) (T6)260-290


Rp0.2 0.2% proof strength (MPa) (O) (H111)110
Rp0.2 0.2% proof strength (MPa) (T4)110
Rp0.2 0.2% proof strength (MPa) (T6)220-240


A - Min. elongation at fracture (%) (O) (H111)16
A - Min. elongation at fracture (%) (T4)14-15
A - Min. elongation at fracture (%) (T6)4-10


A - Min. elongation Lo = 50mm (%) (O) (H111) 14
A - Min. elongation Lo = 50mm (%) (T4) 12-18
A - Min. elongation Lo = 50mm (%) (T6) 6-10


  Brinell hardness   (HBW):   (O) (H111)30
  Brinell hardness   (HBW):   (T4)58 - 65
  Brinell hardness   (HBW):   (T6)80 - 95
  Brinell hardness   (HBW):   (O)40


Properties ENAW-AlMg1SiCu
Intended to be contact with food - yes;
Maximum working temperature Tmax = 160 °C


Equivalent grades of grade   ENAW-AlMg1SiCu   ( ENAW-6061 )
These comparison tables are only intended as an indication of the closest khown equivalent grades.
USA
-
Germany
DIN,WNr
Japan
JIS
Russia
GOST
Inter
ISO
AA6061
3.3211
AlMg1SiCu
6061
AlMg1SiCu


Temper designations
O Annealed
H Strain hardened
F Fabricated (as cast)
T Thermally treated to produce stable tempers other than F, O or H
T1 Cooled from an elevated temperature shaping process and naturally aged
T2 Cooled from an elevated temperature shaping process, cold worked and naturally aged
T3 Solution heat treated, cold worked and naturally aged
T4 Solution heat treated and naturally aged
T5 Cooled from an elevated temperature shaping process and then artificially aged
T6 Solution heat treated and then artificially aged
T7 Solution heat treated and then artificially overaged (stabilised)
T8 Solution heat treated, cold worked and then artificially aged
T9 Solution heat treated, artificially aged and then cold worked
W Solution heat treated (unstable temper)
EN 515:1993 Aluminium and aluminium alloys. Wrought products. Temper designations


Casting processes
S Sand casting
K Chill or permanent mould casting
D Pressure die casting
L Investment casting


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Aluminium - 6000 series ( Magnesium Mg and Silicon Si are major alloying elements )   ENAW-AlMg1SiCu   ( ENAW-6061 )
Chemical composition of   ENAW-AlMg1SiCu   ( ENAW-6061 ). Equivalent grades of   ENAW-AlMg1SiCu   ( ENAW-6061 ).
Standards of   ENAW-AlMg1SiCu   ( ENAW-6061 ). Properties of   ENAW-AlMg1SiCu   ( ENAW-6061 ). Hardness of   ENAW-AlMg1SiCu   ( ENAW-6061 ).

EUROPEAN STEEL AND ALLOY GRADES
©   2011- 2014   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user