EUROPEAN   STEEL   AND   ALLOY   GRADES
steelnumber.com

Home Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us
YOU HERE:   Alloy standards   ->   Aluminium - all grades         OR         Alloy standards   ->     /   EN 573-3   /   EN 755-2   /   EN 485-2   /   EN 1301-2   /   EN 570   /   EN 851   /   EN 941   /   EN 12392   /   EN 1715-3

  ENAW-Al99.7   ( ENAW-1070A )

    Grade :     ENAW-Al99.7
    Number:     ENAW-1070A
    Standard: EN 573 - 3 : 2009   Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 755 - 2 : 2008   Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
EN 485 - 2 : 2008   Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 1301 - 2 : 1997   Aluminium and aluminium alloys. Drawn wire. Mechanical properties
EN 570 : 2007   Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
EN 851 : 1996   Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications
EN 941 : 1996   Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications
EN 12392 : 2000   Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment
EN 1715 - 3 : 2008   Aluminium and aluminium alloys. Drawing stock. Specific requirements for mechanical uses (excluding welding)
    Classification:     Aluminium - 1000 series/ Attention! Grade ENAW-1370 also named ENAW-Al99.7
    Equivalent grades:     Go here


Chemical composition %   of grade   ENAW-Al99.7   ( ENAW-1070A )
Fe Si Mn TiAl Cu Mg Zn Others
max   0.25max   0.2max   0.03max   0.03min   99.7max   0.03max   0.03max   0.07each 0.03;


Mechanical properties of grade   ENAW-Al99.7   ( ENAW-1070A )

Rm - Tensile strength (MPa) (O)60-90
Rm - Tensile strength (MPa) (H12)80-120
Rm - Tensile strength (MPa) (H14)100-140
Rm - Tensile strength (MPa) (F) (H112)60


Rp0.2 0.2% proof strength (MPa) (O)15
Rp0.2 0.2% proof strength (MPa) (H12)55
Rp0.2 0.2% proof strength (MPa) (H14)70
Rp0.2 0.2% proof strength (MPa) (F) (H112)23


A - Min. elongation at fracture (%) (O)32
A - Min. elongation at fracture (%) (F) (H112)25


A - Min. elongation Lo = 50mm (%) (O) 23-35
A - Min. elongation Lo = 50mm (%) (H12) 5-12
A - Min. elongation Lo = 50mm (%) (H14) 4-7
A - Min. elongation Lo = 50mm (%) (F) (H112) 23


  Brinell hardness   (HBW):   (F) (H112)18
  Brinell hardness   (HBW):   (O)18 - 21
  Brinell hardness   (HBW):   (H12)26
  Brinell hardness   (HBW):   (H14)32


Properties ENAW-Al99.7
Intended to be contact with food - yes;
Maximum working temperature Tmax =200 °C


Equivalent grades of grade   ENAW-Al99.7   ( ENAW-1070A )
These comparison tables are only intended as an indication of the closest khown equivalent grades.
USA
-		Germany
DIN,WNr		Japan
JIS 		France
AFNOR		Italy
UNI		Sweden
SS		Poland
PN		Czechia
CSN		Austria
ONORM		Russia
GOST		Inter
ISO
1070A
3.0275
Al99.7
1070
A1070
1070A
4508
9001-3
P-Al99.7
Al99.7
Al99.7
424003
Al99.7
A7
AD00
Al99.7


Temper designations
O Annealed
H Strain hardened
F Fabricated (as cast)
T Thermally treated to produce stable tempers other than F, O or H
T1 Cooled from an elevated temperature shaping process and naturally aged
T2 Cooled from an elevated temperature shaping process, cold worked and naturally aged
T3 Solution heat treated, cold worked and naturally aged
T4 Solution heat treated and naturally aged
T5 Cooled from an elevated temperature shaping process and then artificially aged
T6 Solution heat treated and then artificially aged
T7 Solution heat treated and then artificially overaged (stabilised)
T8 Solution heat treated, cold worked and then artificially aged
T9 Solution heat treated, artificially aged and then cold worked
W Solution heat treated (unstable temper)
EN 515:1993 Aluminium and aluminium alloys. Wrought products. Temper designations


Casting processes
S Sand casting
K Chill or permanent mould casting
D Pressure die casting
L Investment casting

Chemical composition of   ENAW-Al99.7   ( ENAW-1070A ). Equivalent grades of   ENAW-Al99.7   ( ENAW-1070A ). Standards of   ENAW-Al99.7   ( ENAW-1070A ).
Properties of   ENAW-Al99.7   ( ENAW-1070A ). Hardness of   ENAW-Al99.7   ( ENAW-1070A ). Strength of   ENAW-Al99.7   ( ENAW-1070A ). Elongation of   ENAW-Al99.7   ( ENAW-1070A ).


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Chemical composition of   ENAW-Al99.7   ( ENAW-1070A ). Equivalent grades of   ENAW-Al99.7   ( ENAW-1070A ).
Standards of   ENAW-Al99.7   ( ENAW-1070A ). Properties of   ENAW-Al99.7   ( ENAW-1070A ). Hardness of   ENAW-Al99.7   ( ENAW-1070A ).

©   2011- 2013   All rights reserved.       The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user